
Commands Listed in Alphabetical Order
Arguments
<NR3> specifies
the propagation time delay for the connected probe.
Examples
CH1:PROBE:PROPDELAY 100E-12 sets the CH1 propagation delay to 100 ps.
CH1:PROBE:PROPDELAY? might return :CH1 :PROBE:PROPDELAY 1.1E-9
indicating that the CH1 propagation delay is set to 1.1 ns.
CH<x>:PRObe:RECDESkew? (Query Only)
Returns the recommended deskew for the probe connected to the specified
channel.
Group
Vertical
Syntax
CH<x>:PRObe:RECDESkew?
CH<x>:PRObe:RESistance? (Query Only)
Returns the resistance factor of the probe attached to channel <x>, where x is the
channel number.
Group
Vertical
Syntax
CH<x>:PRObe:RESistance?
Examples
CH2:PRObe:RESistance? might return :CH2:PROBE:RESISTANCE
10.0000E+6
indicating that the input resistance of the probe attached to Channel
2is1MΩ.
NOTE. This query will return 0.0 if no probe is attached or the attached probe
does not report the input resistance.
CH<x>:PRObe:SIGnal
Sets or returns the input b ypass setting of a TekVPI probe a ttached to channel
<x>, where x is the channel number. The probe must support input bypass, for
example TCP0001. This command is ignored if sent to an unsupported probe.
Group
Vertical
2-128 MSO4000 and DPO4000 Series Programmer Manual
Komentarze do niniejszej Instrukcji